More Than 7 Years Life
Official product information specifies a service life of over seven years.
The MEu-2CO is a fast-response fuel-cell carbon monoxide sensor for commercial and residential instruments. It provides a 0–500 ppm measurement range, T90 below 15 seconds and a stated service life of more than seven years.
A long-life, fast-response CO sensor for portable, fixed and residential carbon monoxide detection.
Its electrochemical reaction generates a current proportional to the concentration of carbon monoxide.
The sensor combines fast response, low zero output, stable repeatability and a gas filter for compact CO alarm and detector designs.
Official product information specifies a service life of over seven years.
Provides fast response for safety monitoring and alarm applications.
Supports concentration calculation through the external signal-conditioning and calibration circuit.
Designed for consistent response across repeated exposure and recovery cycles.
Provides selectivity for CO detection when used according to the datasheet and application guidance.
Available for integration into fixed, portable, residential and industrial gas-detection products.
| Parameter | Specification |
|---|---|
| Model | MEu-2CO |
| Detected Gas | Carbon monoxide (CO) |
| Measurement Range | 0–500 ppm |
| Maximum Range | 1000 ppm |
| Sensitivity | 45±15 nA/ppm |
| Response Time (T90) | <15 s |
| Zero Output in Clean Air | <±2 ppm equivalent CO |
| Zero Drift (-40°C to 50°C) | <+10 ppm equivalent CO |
| Repeatability | <±3% of output value |
| Linearity | Within ±5% |
| Stability | Average decay <2% per month |
| Filter | Acid gas and organic vapor |
| Expected Life | More than 7 years |
Specifications are based on the official Winsen product page or product manual. Confirm the latest datasheet, calibration requirements, communication protocol and mechanical drawing before final product design.
Contact us for the latest datasheet, model selection support, samples and OEM integration information.